This is the fastest and most efficient method of forming up and pouring our countertop system with the z-form edge molds.
Items Needed:
Tape Measure, Chop Saw, Table Saw, Skill Saw, 1 ¼ Screws, 7/16 OSB board, 1/8 in Masonite, 1 in foam. Sink Cutout Stucco Tape, 3/4 in MDF ½ in staples, 1 1/4 staples, Staple Gun, Compressor, Z-Form for Edges, Silicone Based Caulking #2, Fiberglass Mesh, Razor Blade, Mini Rhino, 30 Metal Flush Cuts, 50 & 100 Diamond Pads. 5/7 in Hand Grinder w/ Shroud, Dust Deputy, Shop Vac, Super Prime 3.0, Satin HS, Chemical Resistant Plastic Cups, Syringes, Filter For Sealer, ElastoCrete Kits, Pigment, High Sheer Mixer, Margin Trowel, Jig Saw, 1 3/8 in Diamond and Wood Drill Bit For Sink Holes.
